View larger
00390033 ÖLFLEX CRANE 4G1 LAPP ÖLFLEX CRANE 4G1
00390033
00390033
ÖLFLEX CRANE 4G1
LAPP
1 m.
Cables > Power cable less 1 kV, for moving application
Control cables for special applications
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Specialized for heavy-duty lifting and handling systems, this Lapp 00390033 crane cable provides exceptional durability under constant tensile stress. Crane and hoist cables are engineered to endure rigorous vertical flexing cycles found in material handling and port logistics. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Core insulation: rubber compound
- Outer sheath: rubber compound, type EM2
- Up to 5 cores: colour-coded according to VDE 0293-308, refer to Appendix T9
- From 6 cores: black with white numbers
- Flexible use: 12.5 x outer diameter
- Fixed installation: 6 x outer diameter
- U0/U: 300/500 V
- Flexible use: -25°C to +80°C
- Fixed installation: -40°C to +80°C
- ETIM 5.0 Class-ID: EC001578
- ETIM 5.0 Class-Description: Flexible cable
- ETIM 6.0 Class-ID: EC001578
- ETIM 6.0 Class-Description: Flexible cable
More info
▲ÖLFLEX® CRANE - flexible cable, flame retardant for outdor use and crane applications/conveyour technology, power and control rubber cable, U0/U:300/500V
- Suitable for outdoor use
- Integrated supporting element
- Also suitable for power chains and
cable trolley systems
Benefits
- Weather-resistant for harsh environmental conditions
- Very flexible due to extra-fine wire conductor design
- Cables up to a max. 24 cores can also be used in power chains
Application range
- Machinery and equipment that are permanently exposed to the weather; conveying and hoisting equipment; construction machinery; shipyard machinery
- Suitable for use in special conditions, such as not more than 2 weeks without interruption of submersion in industrial or sea water
- The application profiles for ÖLFLEX® CRANE and ÖLFLEX® LIFT cables can be found in the appendix, selection table A3
- For highly flexible applications, please follow the assembly guidelines for ÖLFLEX® FD cables in power chains; see appendix T3
Product features
- Flame-retardant according IEC 60332-1-2
- Not suitable for use on guide pulleys or drums under tensile load
- Refer to the article table for the tensile strength of the cable
- The cable should be installed in a way that the supporting element can absorb the tensile forces
- The mobility of the cores must not be affected by the clamps
Norm references / Approvals
- Based on VDE 0250
Product Make-up
- Conductor made of bare copper wires
- Core insulation: rubber compound
- Special supporting element as strain relief
- Outer sheath: rubber compound, type EM2
Classification ETIM 5
- ETIM 5.0 Class-ID: EC001578
- ETIM 5.0 Class-Description: Flexible cable
Classification ETIM 6
- ETIM 6.0 Class-ID: EC001578
- ETIM 6.0 Class-Description: Flexible cable
Core identification code
- Up to 5 cores: colour-coded according to VDE 0293-308, refer to Appendix T9
- From 6 cores: black with white numbers
Conductor stranding
- 0.15 mm wire diameter at 1.0 mm²
- 0.20 mm wire diameter from 1.5 mm²
Minimum bending radius
- Flexible use: 12.5 x outer diameter
- Fixed installation: 6 x outer diameter
Nominal voltage
- U0/U: 300/500 V
Test voltage
- 3000 V
Protective conductor
- G = with GN-YE protective conductor
- X = without protective conductor
Temperature range
- Flexible use: -25°C to +80°C
- Fixed installation: -40°C to +80°C