View larger
0034047 UNITRONIC Li2YCY PiMF 4x2x0,34 LAPP UNITRONIC Li2YCY PiMF 4x2x0,34
0034047
0034047
UNITRONIC Li2YCY PiMF 4x2x0,34
LAPP
1 m.
Cables > Data and communication cable
flexible data cable transfer from special cable
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Lapp 0034047 UNITRONIC Li2YCY PiMF 4x2x0,34 is a screened control cable equipped with pair-in-metal-foil shielding to prevent cross-talk in dense data transmission networks. It is typically installed in process control systems, computer systems, and electronic instrumentation where signal purity is paramount. Pricing, availability, and lead time are confirmed per enquiry through an RFQ.
- Outer sheath: PVC
- Outer sheath colour: grey (similar to pebble grey/ RAL 7032)
- Occasional flexing radius: 20 x outer diameter
- Fixed installation radius: 10 x outer diameter
- Core/core test voltage: 2000 V
- Core/screen test voltage: 1000 V
- Occasional flexing temperature: -5°C to +70°C
- Fixed installation temperature: -40°C to +80°C
More info
▲UNITRONIC® Li2YCY PiMF: Low-frequency low-capacitance screened PVC data cable with DIN 47100 coded PE core Pairs in Metal Foil, RS422/ RS485 interface wiring
Metal foil screened pairs
Benefits
- Data transmission cable with low capacitance, pair screening and overall copper braiding
- Particularly suitable for wiring data systems and controls in large industrial plants
- Individually screened pairs and the overall braid minimise electrical interference
- Decoupling of circuits by means of
twisted-pair (TP) design (crosstalk effects)
Application range
- For enhanced requirements in near-end cross-talk attenuation and high electrical interference in the circuits
- Suitable for the transmission with varying in frequency and voltage or sensitive signals
- Can be used multifunctional in electronics of computer systems, electronic control equipment, office machines, balances, etc.
- For measurement value transmission and serial 2-wire interfaces
- Intended for limited flexible use, and for fixed installation in dry or damp interiors
Product features
- Flame-retardant according IEC 60332-1-2
Product Make-up
- 7-wire or fine-wire (from 1 mm²) strands made of bare copper wires
- Core insulation made of polyethylene (PE)
- Cores twisted into pairs
- Foil wrapping, static screening made of aluminium-laminated plastic film with copper drain wire for each pair
- Bare copper screen braiding
- Outer sheath made of PVC
Outer sheath colour: grey (similar to pebble grey/ RAL 7032)
Classification ETIM 5
- ETIM 5.0 Class-ID: EC000104
- ETIM 5.0 Class-Description: Control cable
Classification ETIM 6
- ETIM 6.0 Class-ID: EC000104
- ETIM 6.0 Class-Description: Control cable
Core identification code
- 0.22 mm²-0.5 mm²:
according to DIN 47100, see table T9 - 1.0 mm²:
a-core: white, b-core: black
Mutual capacitance
- At 800 Hz:
0.22 mm²: max. 70 nF/km
0.34 mm²: max. 70 nF/km
0.5 mm²: max. 75 nF/km
1.0 mm²: max. 85 nF/km
Inductivity
- Approx. 0.4 mH/km
Conductor stranding
- Stranded conductor, based on VDE 0881, 7-wire
Minimum bending radius
- Occasional flexing: 20 x outer diameter
- Fixed installation: 10 x outer diameter
Test voltage
- Core/core: 2000 V
- Core/screen: 1000 V
Characteristic impedance
- approx. 85 Ohm (> 1 MHz)
Temperature range
- Occasional flexing: -5°C to +70°C
- Fixed installation: -40°C to +80°C