View larger
0031372 UNITRONIC LI2YCY (TP) 3X2X0,25 LAPP UNITRONIC LI2YCY (TP) 3X2X0,25
0031372
0031372
UNITRONIC LI2YCY (TP) 3X2X0,25
LAPP
1 m.
Cables > Data and communication cable
flexible data cable transfer from special cable
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Featuring finely stranded copper conductors, this Lapp 0031372 control cable delivers flexible interconnection capabilities for industrial instrumentation and electronic control systems. Twisted-pair geometry combined with protective screening safeguards low-voltage signals in noisy environments.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Conductors: Finely stranded bare copper: Conductors: Finely stranded bare copper
- Outer sheath made of PVC Outer sheath colour: grey (similar to pebble grey/ RAL 7032): Outer sheath made of PVC Outer sheath colour: grey (similar to pebble grey/ RAL 7032)
- At 800 Hz: max. 60 nF/km: At 800 Hz: max. 60 nF/km
- Occasional flexing: 15 x outer diameter: Occasional flexing: 15 x outer diameter
- Fixed installation: 6 x outer diameter: Fixed installation: 6 x outer diameter
- Core/core: 2000 V: Core/core: 2000 V
- Core/screen: 1000 V: Core/screen: 1000 V
- Occasional flexing: -5°C to +70°C: Occasional flexing: -5°C to +70°C
- Fixed installation: -40°C to +80°C: Fixed installation: -40°C to +80°C
- ETIM 5.0 Class-ID: EC000104: ETIM 5.0 Class-ID: EC000104
- ETIM 5.0 Class-Description: Control cable: ETIM 5.0 Class-Description: Control cable
- ETIM 6.0 Class-ID: EC000104: ETIM 6.0 Class-ID: EC000104
- ETIM 6.0 Class-Description: Control cable: ETIM 6.0 Class-Description: Control cable
More info
▲UNITRONIC® Li2YCY (TP) fine-wire: LF, Low-capacitance, flexible, screened PVC data cable, DIN 47100, Twisted PE single core pairs, RS422/ RS485 interface wiring
Cables for RS485/RS422
Benefits
- Overall braid minimises electrical
interference - Decoupling of circuits by means of
twisted-pair (TP) design (crosstalk effects)
Application range
- Particularly suitable for wiring data systems with transmission rates up to 10 Megabits per second, and is qualified for the RS422 and RS485 interfaces.
- For fixed and limited flexible installation
- Can be used in dry or damp rooms
- Signal-, control- and measuring cable,for transmission of low, sensitive signals and high bit rates
- UNITRONIC®
Li2YCYv (TP)with its reinforced, nominal/ minimum average wall thickness of at least 1.8 mm of the black outer sheath (Yv) is designed for indoor and outdoor use as well as for applications where a reinforced outer sheath may turn out to be advantageous
Product features
- Flame-retardant according IEC 60332-1-2
Norm references / Approvals
- Based on VDE 0812
Product Make-up
- Conductors: Finely stranded bare copper
- Core insulation made of polyethylene (PE)
- TP structure
- Tinned-copper braiding
- Outer sheath made of PVC
Outer sheath colour: grey (similar to pebble grey/ RAL 7032)
Classification ETIM 5
- ETIM 5.0 Class-ID: EC000104
- ETIM 5.0 Class-Description: Control cable
Classification ETIM 6
- ETIM 6.0 Class-ID: EC000104
- ETIM 6.0 Class-Description: Control cable
Core identification code
- DIN 47100, refer to Appendix T9
Mutual capacitance
- At 800 Hz: max. 60 nF/km
Inductivity
- approx. 0.65 mH/km
Conductor stranding
- Stranded conductor, fine-wire
Minimum bending radius
- Occasional flexing: 15 x outer diameter
- Fixed installation: 6 x outer diameter
Short-range crosstalk attenuation
- Up to 1 MHz min. 50 dB
- Up to 10 MHz min. 40 dB
Test voltage
- Core/core: 2000 V
- Core/screen: 1000 V
Characteristic impedance
- 100 ± 15 Ohm (> 1 MHz)
Temperature range
- Occasional flexing: -5°C to +70°C
- Fixed installation: -40°C to +80°C