View larger
0031325 UNITRONIC Li2YCY (TP) 2x2x0,34 LAPP UNITRONIC Li2YCY (TP) 2x2x0,34
0031325
0031325
UNITRONIC Li2YCY (TP) 2x2x0,34
LAPP
1 m.
Cables > Data and communication cable
flexible data cable transfer from special cable
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Engineered for low-frequency data and measurement tasks, the Lapp 0031325 control cable protects signals from external electrical noise in industrial plants. Technicians rely on these shielded twisted-pair lines to connect sensitive measurement devices, weighing systems, and automation logic controllers. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Outer sheath made of PVC: Outer sheath made of PVC
- Outer sheath colour: grey (similar to pebble grey/ RAL 7032)
- At 800 Hz: max. 60 nF/km
- Occasional flexing: 15 x outer diameter
- Fixed installation: 6 x outer diameter
- Core/core: 2000 V
- Core/screen: 1000 V
- Occasional flexing: -5°C to +70°C
- Fixed installation: -40°C to +80°C
- ETIM 5.0 Class-ID: EC000104
- ETIM 5.0 Class-Description: Control cable
- ETIM 6.0 Class-ID: EC000104
- ETIM 6.0 Class-Description: Control cable
More info
▲UNITRONIC® Li2YCY (TP): Low-frequency low-capacitance screened PVC data cable with DIN 47100 coded Twisted PE single core pairs, RS422/ RS485 interface wiring
Cables for RS485/RS422
Benefits
- Overall braid minimises electrical
interference - Decoupling of circuits by means of
twisted-pair (TP) design (crosstalk effects)
Application range
- Particularly suitable for wiring data systems with transmission rates up to 10 Megabits per second, and is qualified for the RS422 and RS485 interfaces.
- For fixed and limited flexible installation
- Can be used in dry or damp rooms
- Signal-, control- and measuring cable,for transmission of low, sensitive signals and high bit rates
- UNITRONIC®
Li2YCYv (TP)with its reinforced, nominal/ minimum average wall thickness of at least 1.8 mm of the black outer sheath (Yv) is designed for indoor and outdoor use as well as for applications where a reinforced outer sheath may turn out to be advantageous
Product features
- Flame-retardant according IEC 60332-1-2
Norm references / Approvals
- Based on VDE 0812
Product Make-up
- 7-wire bare stranded copper conductor
- Core insulation made of polyethylene (PE)
- TP structure
- Tinned-copper braiding
- Outer sheath made of PVC
Outer sheath colour: grey (similar to pebble grey/ RAL 7032)
Classification ETIM 5
- ETIM 5.0 Class-ID: EC000104
- ETIM 5.0 Class-Description: Control cable
Classification ETIM 6
- ETIM 6.0 Class-ID: EC000104
- ETIM 6.0 Class-Description: Control cable
Core identification code
- DIN 47100, refer to Appendix T9
Mutual capacitance
- At 800 Hz: max. 60 nF/km
Inductivity
- approx. 0.65 mH/km
Conductor stranding
- Stranded conductor, based on VDE 0881, 7-wire
Minimum bending radius
- Occasional flexing: 15 x outer diameter
- Fixed installation: 6 x outer diameter
Short-range crosstalk attenuation
- Up to 1 MHz min. 50 dB
- Up to 10 MHz min. 40 dB
Test voltage
- Core/core: 2000 V
- Core/screen: 1000 V
Characteristic impedance
- 100 ± 15 Ohm (> 1 MHz)
Temperature range
- Occasional flexing: -5°C to +70°C
- Fixed installation: -40°C to +80°C