- MENU
- Home
-
Categories
- Air conditioner (switchgear cabinet)
- Base/base element (switchgear cabinet)
- Case for component installation with modular spacing 19 inch
- Climate control door (enclosure/cabinet)
- Climate control side panel (enclosure/cabinet)
- Component for arrangement / baying system (switchgear cabinet)
- View all categories
- Accessories/spare parts for domestic switching devices
- Accessories/spare parts for socket outlets/plugs with protective contact
- Cable entry
- Combination of switch/push button with socket outlet
- Control element/cover plate for domestic switching devices
- Controller for light controlling system
- View all categories
- Accessories/spare parts for earthing and lightning
- Accessories/spare parts for surge protection data networks/MCR-technology
- Accessories/spare parts for surge protection power supply systems
- Air-termination equipment for lightning protection
- Base for air termination systems lightning protection
- Basic element for surge protection device
- View all categories
- AC-power supply
- Accessories/spare parts for command devices
- Accessories/spare parts for electronic motor control and protection device
- Accessories/spare parts for emergency stop pull cord switch
- Accessories/spare parts for frequency controller
- Accessories/spare parts for low-voltage switch technology
- View all categories
- Accessories/spare parts for underfloor installation ducting systems
- Bend for underfloor installation ducting systems
- Coupler for underfloor installation duct
- Cover for underfloor installation duct flush floor open
- Cover plate for installation units
- End piece for underfloor installation duct
- View all categories
- Request Quote
- How RFQ Works
- Contact Us
- FAQ
View larger
Images are for illustrative purposes only. Please refer to data sheet for details
SN3-000-MMEU8 100646 EATON ELECTRIC Moni stabilized power source
SN3-000-MMEU8
100646
EATON - MOELLER
1 Pcs.
Moni stabilized power source
Signal module for the switched-mode power supply units SN3-50-EU8/SN3-100-EU8/SN3-200-EU8, LED display for the states: input o.k./output o.K./remote off relay output 1 changeover contact: Input o.k. relay output 1 changeover contact:output o.k., remote ON-/OFF function for external switching
Automation > PLC system power supply
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
More info
▲Delivery programme
Product range | Signal module for SN3-...-EU8 power supply unit | ||
Description | LED display: Input o.k. LED display: Output o.k. LED display: Remote off Relay output 1 changeover: Input o.k. Relay output 1 changeover: Output o.k. Remote ON-/OFF function for external switching | ||
Nominal input voltage | 110 - 240 V AC 100 - 350 DC | ||
Input voltage range | 70 - 264 V AC 80 - 350 V DC | ||
For use with | SN3-50-EU8 SN3-100-EU8 SN3-200-EU8 |
Technical data
| General | |||
Standards | IEC 61204 73/23/EWG 89/336/EWG EN 50178, EN 60950, UL 60950, UL 508 | ||
Duty factor | % | 100 | |
Dimensions (W x H x D) | mm | 56,25 x 54 x 24 (in installed state) | |
Weight | kg | 0.065 | |
Terminal capacities | mm2 | ||
Flexible with ferrule | mm2 | 0.2…2.5 (22…14 AWG) | |
Flexible without ferrule | mm2 | 0.2…2.5 (22…14 AWG) | |
Massive | mm2 | 0.2…4 (22…14 AWG) | |
Degree of protection | |||
Enclosures | IP20 | ||
Terminals | IP20 | ||
Protection class | 2 | ||
Mounting | Plugged into power supply unit | ||
Fixing | Snap fastener, tool-less | ||
Vibrations (IEC/EN 60068-2-6) | 1…57 Hz, amplitude ±0.075 mm, 57…100 Hz, 5 g | ||
Mechanical shock resistance (IEC 60068-2-27) | 5 g all directions | ||
| Environmental compatibility | |||
Ambient temperature | |||
Operation | °C | -25 - +70 | |
Storage | °C | - 40 - + 85 | |
Climatic proofing | 93% at +40°C according to IEC 60068-2-3, no condensation | ||
Climatic class (IEC) | 3K3 according to EN 60721 | ||
| Insulation voltage | |||
Rated insulation voltage | Ui | V AC | 250 nach IEC 60974-1, EN 50178, VDE 0160 |
Power supply/measuring circuit/relay outputs | Safe isolation according to EN 50178, EN 60950 | ||
Rated impulse withstand voltage between all insulated circuits | Uimp | kV | 4 according to IEC 664, VDE 0110 |
Test voltage between all circuits | kV | 2.5 AC (routine test) | |
Overvoltage category/pollution degree | according to EN 60950, Class 2 | ||
| Input circuit | |||
Nominal input voltage | 110 - 240 V AC 100 - 350 DC | ||
Instructions | supplied from the input circuit of the power supply | ||
Input voltage range | 70 - 264 V AC 80 - 350 V DC | ||
Power consumption | VA | 2.5 | |
Power consumption | Pmax. | W | 1.5 |
Heat dissipation | W | Max. 1.5 | |
| REMOTE-OFF input | |||
| potential-free | |||
Switch off | R | ||
Technical data for design verification | |||
Rated operational current for specified heat dissipation | In | A | 0 |
Heat dissipation per pole, current-dependent | Pvid | W | 0 |
Equipment heat dissipation, current-dependent | Pvid | W | 0 |
Static heat dissipation, non-current-dependent | Pvs | W | 1.5 |
Heat dissipation capacity | Pdiss | W | 0 |
Operating ambient temperature min. | °C | -25 | |
Operating ambient temperature max. | °C | 70 | |
IEC/EN 61439 design verification | |||
10.2 Strength of materials and parts | |||
10.2.2 Corrosion resistance | Meets the product standard's requirements. | ||
10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. | ||
10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. | ||
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Meets the product standard's requirements. | ||
10.2.4 Resistance to ultra-violet (UV) radiation | Meets the product standard's requirements. | ||
10.2.5 Lifting | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.2.6 Mechanical impact | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.2.7 Inscriptions | Meets the product standard's requirements. | ||
10.3 Degree of protection of ASSEMBLIES | Meets the product standard's requirements. | ||
10.4 Clearances and creepage distances | Meets the product standard's requirements. | ||
10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. | ||
10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. | ||
10.8 Connections for external conductors | Is the panel builder's responsibility. | ||
10.9 Insulation properties | |||
10.9.2 Power-frequency electric strength | Is the panel builder's responsibility. | ||
10.9.3 Impulse withstand voltage | Is the panel builder's responsibility. | ||
10.9.4 Testing of enclosures made of insulating material | Is the panel builder's responsibility. | ||
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. | ||
10.11 Short-circuit rating | Is the panel builder's responsibility. | ||
10.12 Electromagnetic compatibility | Is the panel builder's responsibility. | ||
10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. | ||
Technical data ETIM 6.0(Show features)(Hide features)
| PLC's (EG000024) / PLC system power supply (EC000599) | |||
| Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / SPS system power supply ([email protected] [AKE532011]) | |||
Input voltage at AC 50 Hz | V | 85 - 264 | |
Input voltage at AC 60 Hz | V | 85 - 264 | |
Input voltage at DC | V | 80 - 350 | |
Type of voltage (input voltage) | AC/DC | ||
Max. input current AC 50 Hz | A | 0 | |
Max. input current AC 60 Hz | A | 0 | |
Max. input current DC | A | 0 | |
Type of output voltage | DC | ||
Output voltage at AC 50 Hz | V | 0 - 0 | |
Output voltage at AC 60 Hz | V | 0 - 0 | |
Output voltage at DC | V | 0 - 0 | |
Max. output current AC 50 Hz | A | 0 | |
Max. output current AC 60 Hz | A | 0 | |
Max. output current DC | A | 0 | |
Redundancy | Yes | ||
Suitable for safety functions | No | ||
Width | mm | 90 | |
Height | mm | 54 | |
Depth | mm | 24 | |
| Feature Name | Feature Value |
|---|---|
| Redundancy (EF003156) | No |
| Suitable for safety functions (EF001597) | No |
| Width (EF000008) | 57 mm |
| Height (EF000040) | 54 mm |
| Depth (EF000049) | 24 mm |