View larger
Images are for illustrative purposes only. Please refer to data sheet for details
DILL18(230V50HZ,240V60HZ) 104405 Y7-104405 EATON ELECTRIC Contactor, 3p, 18A, for lamp load (HQL)
DILL18(230V50HZ,240V60HZ)
104405
Y7-104405
EATON - MOELLER
1 Pcs.
Contactor, 3p, 18A, for lamp load (HQL)
DILL18(230V50HZ,240V60HZ)
Lamp load contactor, 230 V 50 Hz, 240 V 60 Hz, 220 V 230 V: 18 A, Contactors for lighting systems
Lamp load contactors, Application: Contactors for lighting systems, Utilization category: AC-1: Non-inductive or slightly inductive loads, resistance furnaces, Rated operational current 380 V 400 V: Ie = 21 A, Rated operational current AC-1 Conventional free air thermal current, 3 pole, 50 - 60 Hz Open at 40 °C: Ith =Ie = 40 A, Actuating voltage: 230 V 50 Hz, 240 V 60 Hz, Standards: IEC/EN 60947, VDE 0660, UL, CSA, Degree of Protection: IP00
Automation > Power contactor, AC switching
Contactors up to 170A
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
More info
▲Lamp load contactor, 230 V 50 Hz, 240 V 60 Hz, 220 V 230 V: 18 A, Contactors for lighting systems
Lamp load contactors, Application: Contactors for lighting systems, Utilization category: AC-1: Non-inductive or slightly inductive loads, resistance furnaces, Rated operational current 380 V 400 V: Ie = 21 A, Rated operational current AC-1 Conventional free air thermal current, 3 pole, 50 - 60 Hz Open at 40 °C: Ith =Ie = 40 A, Actuating voltage: 230 V 50 Hz, 240 V 60 Hz, Standards: IEC/EN 60947, VDE 0660, UL, CSA, Degree of Protection: IP00
Delivery program
Product range
DILL Lighting contactors
Application
Contactors for lighting systems
Utilization category
AC-1: Non-inductive or slightly inductive loads, resistance furnaces
Rated operational current
AC-5a220 V 230 V [Ie]
18 A
AC-5a380 V 400 V [Ie]
18 A
AC-5b220 V 230 V [Ie]
21 A
AC-5b380 V 400 V [Ie]
21 A
AC-1Conventional free air thermal current, 3 pole, 50 - 60 HzOpenat 40 °C [Ith=Ie]
40 A
Contact sequence
Actuating voltage
230 V 50 Hz, 240 V 60 Hz
Note
| Switchgear for lighting systems | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DIL | L12 | L18 | L20 | M7 | M9 | M12 | M17 | M25 | M32 | M40 | M50 | |
| Permissible compensation capacitance | Cmax [mF] | 470 | 470 | 470 | 47 | 80 | 100 | 220 | 330 | 470 | 470 | 500 |
| Filament lamp | Ie [A] | 14 | 21 | 27 | 6 | 7.5 | 10 | 14 | 21 | 27 | 33 | 42 |
| Mercury blended lamps | Ie [A] | 12 | 16 | 23 | 5 | 6.5 | 8.5 | 12 | 16 | 23 | 30 | 38 |
| Fluorescent lamps, conventional -reactor – starter – connection | Ie [A] | 20 | 26 | 35 | 9 | 10 | 15 | 20 | 26 | 35 | 41 | 45 |
| Fluorescent lamps, conventional -reactor – starter – connection | Ie [A] | 20 | 26 | 35 | 5.5 | 8 | 13 | 15 | 22.5 | 29 | 36 | 47 |
| Fluorescent lamps, duo circuit (series compensated) | Ie [A] | 12 | 18 | 20 | 5 | 6.5 | 8.5 | 12 | 17.5 | 22.5 | 28 | 35 |
| electronic upstream devices and LED lamps | Ie [A] | 12 | 18 | 20 | 3.5 | 6 | 10 | 12 | 17.5 | 20 | 25 | 30 |
| High-pressure mercury-arc lamps | Ie [A] | 12 | 18 | 20 | 3.5 | 6 | 10 | 12 | 17.5 | 20 | 25 | 30 |
| Metal-halide lamps | Ie [A] | 12 | 18 | 20 | 3.5 | 6 | 10 | 12 | 17.5 | 20 | 25 | 30 |
| Low-pressure sodium lamps | Ie [A] | 7.5 | 10 | 12 | 3 | 4 | 6 | 7.5 | 10 | 12 | 15 | 22 |
| DIL | M65 | M80 | M95 | M115 | M150 | M185A | M225A | M250A | M300A | M400A | M500A | |
| Permissible compensation capacitance | Cmax [mF] | 500 | 550 | 620 | 830 | 970 | 2055 | 2300 | 2600 | 3000 | 3250 | 3500 |
| Filament lamp | Ie [A] | 55 | 67 | 79 | 95 | 125 | 153 | 187 | 208 | 349 | 332 | 415 |
| Mercury blended lamps | Ie [A] | 45 | 65 | 67 | 80 | 110 | 123 | 150 | 167 | 200 | 266 | 332 |
| Fluorescent lamps, conventional -reactor – starter – connection | Ie [A] | 55 | 95 | 100 | 125 | 145 | 207 | 237 | 263 | 300 | 375 | 525 |
| Fluorescent lamps, conventional -reactor – starter – connection | Ie [A] | 59 | 71 | 95 | 100 | 138 | 186 | 213 | 236 | 270 | 338 | 473 |
| Fluorescent lamps, duo circuit (series compensated) | Ie [A] | 45.5 | 56 | 66.5 | 80.5 | 105 | 130 | 158 | 175 | 210 | 280 | 350 |
| electronic upstream devices and LED lamps | Ie [A] | 36 | 55 | 60 | 80 | 95 | 138 | 158 | 175 | 200 | 250 | 350 |
| High-pressure mercury-arc lamps | Ie [A] | 36 | 55 | 60 | 80 | 95 | 138 | 158 | 175 | 200 | 250 | 350 |
| Metal-halide lamps | Ie [A] | 36 | 55 | 60 | 80 | 95 | 138 | 158 | 175 | 200 | 250 | 350 |
| Low-pressure sodium lamps | Ie [A] | 25 | 35 | 40 | 50 | 70 | 100 | 11 | 123 | 140 | 175 | 245 |
| In compensated lamps, the sum of the capacitances must not exceed the contactors' max. permissible capacitor load (Cmax)! The values in the table are for each contact in the contactors. | ||||||||||||
Technical data
General
Standards
IEC/EN 60947, VDE 0660, UL, CSA
Lifespan, mechanicalAC operated [Operations]
1 x 106
Operating frequency, mechanicalAC operated [Operations/h]
60
Climatic proofing
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperatureOpen
-25 - +60 °C
Ambient temperatureEnclosed
- 25 - 40 °C
Ambient temperatureStorage
- 40 - 80 °C
Mounting position
Mechanical shock resistance (IEC/EN 60068-2-27)Half-sinusoidal shock, 10 msMechanical shock resistance
6.9 g
Degree of Protection
IP00
Altitude
Max. 2000 m
WeightAC operated
0.42 kg
Main conducting paths
Rated impulse withstand voltage [Uimp]
8000 V AC
Overvoltage category/pollution degree
III/3
Rated insulation voltage [Ui]
690 V AC
Rated operational voltage [Ue]
690 V AC
Making capacity
350 A
Breaking capacity [380 … 400 V]
250 A
Lifespan, electrical [Operations]
10000
Short-circuit protection maximum fuse400 V [gG/gL 500 V]
100 A
AC
AC-1Rated operational currentConventional free air thermal current, 3 pole, 50 - 60 HzOpenat 40 °C [Ith=Ie]
40 A
AC-1Rated operational currentConventional free air thermal current, 3 pole, 50 - 60 HzOpenat 60 °C [Ith=Ie]
35 A
AC-5a operation220 V 230 V [Ie]
18 A
AC-5a operation380 V 400 V [Ie]
18 A
AC-5b operation220 V 230 V [Ie]
21 A
AC-5b operation380 V 400 V [Ie]
21 A
AC-5b operation380 V 400 V [Ie]
21 A
Electric lampsFilament bulbs
21 A
Electric lampsMercury blended lamps
16 A
Electric lampsFluorescent lamp loadConventional reactor starter circuit
26 A
Electric lampsFluorescent lamp loadDuo circuit
26 A
Electric lampsElectronic upstream devices
18 A
Electric lampsHigh-pressure mercury vapour lamps
18 A
Electric lampsMetal-halide lamps
18 A
Electric lampsHigh-pressure sodium lamps
18 A
Electric lampsLow-pressure sodium lamps
10 A
Electric lampsMaximum permissible compensation capacitance
470 µF
Additional technical data
like the contactar [DIL]
M25
Rating data for approved types
Switching capacityGeneral use
35 A
Short Circuit Current RatingBasic RatingSCCR
5 kA
Short Circuit Current RatingBasic Ratingmax. Fuse
125 A
Short Circuit Current RatingBasic Ratingmax. CB
125 A
Short Circuit Current Rating480 V High FaultSCCR (fuse)
100 kA
Short Circuit Current Rating480 V High Faultmax. Fuse
100 Class J A
Short Circuit Current Rating480 V High FaultSCCR (CB)
22 kA
Short Circuit Current Rating480 V High Faultmax. CB
32 A
Short Circuit Current Rating600 V High FaultSCCR (fuse)
100 kA
Short Circuit Current Rating600 V High Faultmax. Fuse
100 Class J A
Short Circuit Current Rating600 V High FaultSCCR (CB)
22 kA
Short Circuit Current Rating600 V High Faultmax. CB
32 A
Special Purpose RatingsIncandescent Lamps (Tungsten)480V 60Hz 3phase, 277V 60Hz 1phase
35 A
Special Purpose RatingsIncandescent Lamps (Tungsten)600V 60Hz 3phase, 347V 60Hz 1phase
35 A
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation [In]
21 A
Heat dissipation per pole, current-dependent [Pvid]
1 W
Equipment heat dissipation, current-dependent [Pvid]
3 W
Static heat dissipation, non-current-dependent [Pvs]
2.1 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+60 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Power contactor, AC switching (EC000066)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Contactor (LV) / Power contactor, AC switching ([email protected] [AAB718015])
Rated control supply voltage Us at AC 50HZ
230 - 230 V
Rated control supply voltage Us at AC 60HZ
240 - 240 V
Rated control supply voltage Us at DC
0 - 0 V
Voltage type for actuating
AC
Rated operation current Ie at AC-1, 400 V
18 A
Rated operation current Ie at AC-3, 400 V
0 A
Rated operation power at AC-3, 400 V
0 kW
Rated operation current Ie at AC-4, 400 V
0 A
Rated operation power at AC-4, 400 V
0 kW
Rated operation power NEMA
0 kW
Modular version
No
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as normally closed contact
0
Type of electrical connection of main circuit
Screw connection
Number of normally closed contacts as main contact
0
Number of main contacts as normally open contact
3
Approvals
Product Standards
IEC/EN 60947-4-1; UL 60947-4-1; CSA - C22.2 No. 60947-4-1-14; CE marking
UL File No.
E29096
UL Category Control No.
NLDX
CSA File No.
012528
CSA Class No.
3211-04
North America Certification
UL listed, CSA certified
Specially designed for North America
No
Dimensions
distance at side to earthed parts: 6 mm
| Feature Name | Feature Value |
|---|---|
| Rated control supply voltage AC 50 Hz (EF003978) | 230 V |
| Rated control supply voltage AC 60 Hz (EF003979) | 240 V |
| Rated control supply voltage DC (EF003980) | 0 V |
| Voltage type for actuating (EF008242) | AC |
| Number of normally closed contacts as main contact (EF001375) | 0 |
| Number of normally open contacts as main contact (EF001374) | 3 |
| Type of electrical connection of main circuit (EF006819) | Screw connection |
| Operating voltage AC 50 Hz (EF008206) | 230 V |
| Operating voltage AC 60 Hz (EF008207) | 230 V |
| Rated operation current Ie at AC-1, 400 V (EF001393) | 18 A |
| Rated operation current Ie at AC-3, 400 V (EF001392) | 0 A |
| Rated operation power at AC-3, 400 V (EF001364) | 0 kW |
| Rated operation current Ie at AC-4, 400 V (EF008495) | 0 A |
| Rated operation power at AC-4, 400 V (EF008496) | 0 kW |
| Rated operation power NEMA (EF011960) | 0 kW |
| Number of auxiliary contacts as normally open contact (EF001376) | 0 |
| Number of auxiliary contacts as normally closed contact (EF001377) | 0 |
| Modular version (EF001126) | false |
| Width (EF000008) | 45 mm |
| Height (EF000040) | 85 mm |
| Depth (EF000049) | 97 mm |