MENU
Home
Categories
Accessories for power tools
Accessories/components for fasteners and anchoring systems
- Eye bolt
Accessories/spare parts for instruments
- Accessories/spare parts for HVAC sensors
- Display assembly set
Accessories/spare parts for toolbox, chest, trolley and workbench
Alarm installations, emergency call and signalling
Auxiliary material
Batteries, chargers and power cords
Cabinet enclosures
Cable and wire entry systems
Cable carrying systems
Cable installation ducts
- Joint clip for installation duct
Cables
Circuit breakers and fuses
Communication technique
Connectors
Cooling systems
- Accessories/spare parts for airconditioning
Cutting and sawing tools
Data and telecommunication
Devices for distribution board-/surface mounting
Distribution boards
Domestic switching devices
Earthing, lightning and surge protection
Electrical power tools
Electrical wall ducts / installation columns
- Accessories/spare parts for wall duct
Energy distribution systems
Equipment for workshop/construction site
Fasteners
Fasteners and anchoring systems
- Bolt
- Expanding rivet
- Nut
- Screw/nut cap
- Stud
- Wing bolt
Fastening tools
Filters/separators
- Cartridge air filter
- Flat air filter
Fire protection systems
Fittings, flanges and connectors
- Compression ring
Flow and pressure measurement instruments
- Cable for control apparatus with connector
- Liquid level sensor
Hand tools
Hand tools, others
- Busbar tool
High voltage distribution systems
- Plug termination for medium and high voltage cables
- Spark gap for overvoltage protection
Hoses and hose cabinets
- Plastic hose, uninsulated with spiral
Installation bus systems
Installation column systems
Installation material for cables and tubes
Installation pipes/cable protection tubes
Installation, isolation and connection material
Installation/connection material
Lamps
Low-voltage industrial components
Low-voltage switchgear and control gear
- Energy management controller
- Filter circuit coil for low-voltage
Low-voltage switchgear and control gear (automation)
- Discrete electronic component
Luminaires
Measuring and control devices
Measuring instruments and tester
Meters
- Hour meter
- Kilowatt-hour meter
Mounting material for ducts and pipes
- Stirrup bolt U-form
Mounting systems
- Accessories/spare parts for universal suspension system
- Universal suspension system
Office equipment
Optical and acoustic signalling equipment
Optoelectronic sensors
- Single beam light curtain
PLC's
Packing container
Photovoltaics, wind energy
Pliers
- Accessories/spare parts for pliers and clamps
- Pliers wrench
Power tools
- Hot air gun (electric)
- Screw driver (battery)
Pressure increase/decrease
- Accessories/spare parts for ventilator
Protective hose systems
Relays
Screwdriver (electric)
Sensors
Sensors for automation technology
Slotted Cable trunking system
Small domestic appliances
- Slicing machine
Solar thermal energy
- Solar mounting profile
Stats, switches and controllers
Steel trunkings
- Steel trunking tee
Sub-floor systems
Terminal blocks
Tool trolley
Tools (Press, cut and isolate)
Request Quote
How RFQ Works
Contact Us
FAQ

EATON - MOELLER ZBT12-10 ZBT12-10 190938 Y7-190938 EATON ELECTRIC Overload relay strait 6 10 1 NO + 1 NC direct Mounting in DILMT7.....

View larger

Images are for illustrative purposes only. Please refer to data sheet for details

ZBT12-10 190938 Y7-190938 EATON ELECTRIC Overload relay strait 6 10 1 NO + 1 NC direct Mounting in DILMT7.....

Name: ZBT12-10 190938 Y7-190938 EATON ELECTRIC Overload relay strait 6 10 1 NO + 1 NC direct Mounting in DILMT7.....
Brand: EATON - MOELLER
SKU: 190938

Reference: ZBT12-10

Code: 190938

Catalog Number: Y7-190938

Manufacturer: EATON - MOELLER

Units per package: 1 Pcs.

Description:

Overload relay strait; 6 - 10; 1 NO + 1 NC; direct Mounting in DILMT7...12 ZBT12-10 Overload relay, ZBT12, Ir= 6 - 10 A, 1 N/O, 1 N/C, Direct mounting, IP20 Overload relay, Product range: Overload relay ZBT up to 97 A, Accessories, Accessories: Overload relays, Frame size: ZBT12, Phase-failure sensitivity: IEC/EN 60947, VDE 0660 Part 102, Description: Test/off button, Reset pushbutton manual/auto, Trip-free release, Mounting type: Direct mounting, Auxiliary contacts N/O = Normally open: 1 N/O, Auxiliary contacts N/C = Normally closed: 1 N/C, For use with: DILMT7, DILMT9, DILMT12, DILMT17, DILMT25, DILMT32, Standards: IEC/EN 60947, GB14048, Degree of Protection: IP20

Categories:
Automation > Thermal overload relay
Thermal Relays

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Guarantee, repair and return.

More info

▲

Overload relay, ZBT12, Ir= 6 - 10 A, 1 N/O, 1 N/C, Direct mounting, IP20

Overload relay, Product range: Overload relay ZBT up to 97 A, Accessories, Accessories: Overload relays, Frame size: ZBT12, Phase-failure sensitivity: IEC/EN 60947, VDE 0660 Part 102, Description: Test/off button, Reset pushbutton manual/auto, Trip-free release, Mounting type: Direct mounting, Auxiliary contacts N/O = Normally open: 1 N/O, Auxiliary contacts N/C = Normally closed: 1 N/C, For use with: DILMT7, DILMT9, DILMT12, DILMT17, DILMT25, DILMT32, Standards: IEC/EN 60947, GB14048, Degree of Protection: IP20

Delivery program

Product range

Overload relay ZBT up to 97 A

Product range

Accessories

Overload relays

Frame size

ZBT12

Phase-failure sensitivity

IEC/EN 60947, VDE 0660 Part 102

Description

Test/off button
Reset pushbutton manual/auto
Trip-free release
Overload trigger: tripping class 10 A

Mounting type

Direct mounting

[I_r]

6 - 10 A

Contact sequence

Auxiliary contacts

N/O = Normally open

1 N/O

N/C = Normally closed

1 N/C

For use with

DILMT7
DILMT9
DILMT12
DILMT17
DILMT25
DILMT32

Technical data

General

Standards

IEC/EN 60947, GB14048

Climatic proofing

Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature

Operating range to IEC/EN 60947: -5 - +40 °C

Ambient temperatureOpen

-25 - +55 °C

Ambient temperatureEnclosed

- 25 - 40 °C

Temperature compensation

Continuous

Weight

0.104 kg

Mechanical shock resistance

10
Sinusoidal
Shock duration 10 ms g

Degree of Protection

IP20

Protection against direct contact when actuated from front (EN 50274)

Finger and back-of-hand proof

Main conducting paths

Rated impulse withstand voltage [U_imp]

6000 V AC

Overvoltage category/pollution degree

III/3

Rated insulation voltage [U_i]

690 V

Rated operational voltage [U_e]

690 V AC

Safe isolation to EN 61140Between auxiliary contacts and main contacts

440 V AC

Safe isolation to EN 61140Between main circuits

440 V AC

Terminal capacitiesSolid

1 x (1 - 6) mm²

Terminal capacitiesFlexible with ferrule

1 x (1 - 6) mm²

Terminal capacitiesStranded

1 x (1 - 6) mm²

Terminal screw

M3.5

Tightening torque

1.2 Nm

Stripping length

8 mm

ToolsPozidriv screwdriver

2 Size

Auxiliary and control circuits

Rated impulse withstand voltage [U_imp]

4000 V

Overvoltage category/pollution degree

III/3

Terminal capacitiesSolid

1 x (0.75 - 2.5) mm²

Terminal capacitiesFlexible with ferrule

1 x (0.75 - 2.5) mm²

Terminal screw

Tightening torque

0.8 Nm

Stripping length

6 mm

ToolsPozidriv screwdriver

2 Size

ToolsStandard screwdriver

1 x 6 mm

Rated insulation voltage [U_i]

690 V AC

Rated operational voltage [U_e]

690 V AC

Conventional thermal current [I_th]

10 A

Rated operational current [I_e]AC-15Make contact120 V [I_e]

1.5 A

Rated operational current [I_e]AC-15Make contact220 V 230 V 240 V [I_e]

1.4 A

Rated operational current [I_e]AC-15Make contact380 V 400 V 415 V [I_e]

1.9 A

Rated operational current [I_e]AC-15Make contact500 V [I_e]

0.5 A

Rated operational current [I_e]AC-15Break contact120 V [I_e]

1.5 A

Rated operational current [I_e]AC-15Break contact220 V 230 V 240 V [I_e]

1.5 A

Rated operational current [I_e]AC-15Break contact380 V 400 V 415 V [I_e]

1.9 A

Rated operational current [I_e]AC-15Break contact500 V [I_e]

1.4 A

Rated operational current [I_e]DC L/R ≦ 15 ms

Switch-on and switch-off conditions based on DC-13, time constant as specified.

Rated operational current [I_e]DC L/R ≦ 15 ms24 V [I_e]

0.9 A

Rated operational current [I_e]DC L/R ≦ 15 ms60 V [I_e]

0.75 A

Rated operational current [I_e]DC L/R ≦ 15 ms110 V [I_e]

0.55 A

Rated operational current [I_e]DC L/R ≦ 15 ms220 V [I_e]

0.27 A

Short-circuit rating without weldingmax. fuse

6 A gG/gL

Notes

Notes

Ambient air temperature: Operating range to IEC/EN 60947, PTB: -5°C to +55°C
Main circuits terminal capacity solid and flexible conductors with ferrules: When using 2 conductors use equal cross-sections.

Design verification as per IEC/EN 61439

Operating ambient temperature min.

-25 °C

Operating ambient temperature max.

+55 °C

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Thermal overload relay (EC000106)

Electric engineering, automation, process control engineering / Low-voltage switch technology / Overload protection device / Thermal overload relay ([email protected] [AKF075014])

Adjustable current range

6 - 10 A

Max. rated operation voltage Ue

690 V

Mounting method

Direct attachment

Type of electrical connection of main circuit

Screw connection

Number of auxiliary contacts as normally closed contact

Number of auxiliary contacts as normally open contact

Number of auxiliary contacts as change-over contact

Release class

Other

Reset function input

Reset function automatic

Yes

Reset function push-button

Yes

Approvals

Specially designed for North America

Dimensions

ETIM for 190938 Low-voltage industrial controls and switchgear (EC000106)
Feature Name	Feature Value
Adjustable current range (EF008211)	6 A
Max. rated operation voltage Ue (EF007357)	690 V
Mounting method (EF000003)	Direct attachment
Type of electrical connection of main circuit (EF006819)	Screw connection
Number of auxiliary contacts as normally closed contact (EF001377)	1
Number of auxiliary contacts as normally open contact (EF001376)	1
Number of auxiliary contacts as change-over contact (EF003531)	0
Release class (EF006668)	CLASS 10 A
Reset function input (EF011940)	No
Reset function automatic (EF011941)	Yes
Reset function push-button (EF011942)	Yes

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.

View PDF Download

ZBT12-10 190938 Y7-190938 EATON ELECTRIC Overload relay strait 6 10 1 NO + 1 NC direct Mounting in DILMT7.....

Request a Quote

More info

Delivery program

Technical data

Design verification as per IEC/EN 61439

Technical data ETIM 7.0

Approvals

Dimensions

Product Datasheet