- MENU
- Home
-
Categories
- Air conditioner (switchgear cabinet)
- Base/base element (switchgear cabinet)
- Case for component installation with modular spacing 19 inch
- Climate control door (enclosure/cabinet)
- Climate control side panel (enclosure/cabinet)
- Component for arrangement / baying system (switchgear cabinet)
- View all categories
- Accessories/spare parts for domestic switching devices
- Accessories/spare parts for socket outlets/plugs with protective contact
- Cable entry
- Combination of switch/push button with socket outlet
- Control element/cover plate for domestic switching devices
- Controller for light controlling system
- View all categories
- Accessories/spare parts for earthing and lightning
- Accessories/spare parts for surge protection data networks/MCR-technology
- Accessories/spare parts for surge protection power supply systems
- Air-termination equipment for lightning protection
- Base for air termination systems lightning protection
- Basic element for surge protection device
- View all categories
- AC-power supply
- Accessories/spare parts for command devices
- Accessories/spare parts for electronic motor control and protection device
- Accessories/spare parts for emergency stop pull cord switch
- Accessories/spare parts for frequency controller
- Accessories/spare parts for low-voltage switch technology
- View all categories
- Accessories/spare parts for underfloor installation ducting systems
- Bend for underfloor installation ducting systems
- Coupler for underfloor installation duct
- Cover for underfloor installation duct flush floor open
- Cover plate for installation units
- End piece for underfloor installation duct
- View all categories
- Request Quote
- How RFQ Works
- Contact Us
- FAQ
View larger
Images are for illustrative purposes only. Please refer to data sheet for details
PSG480E24RM 172894 Y7-172894 EATON ELECTRIC Power supply single Phase 100-240 V AC/24 V DC 20A
PSG480E24RM
172894
Y7-172894
EATON - MOELLER
1 Pcs.
Power supply; single Phase; 100-240 V AC/24 V DC; 20A
PSG480E24RM
Eaton PSG Power supply unit, 1-phase, 100-240VAC/24VDC, 20A
Power supply unit, Product range: Power supplies PSG, Subrange: power supply unit, Description: Power Boost via 2-fold rated operational current for 2 s, PELV (EN 60204), SELV (EN 60950), Width: 144 mm, Height: 121 mm, Depth: 118.6 mm, Single-phase, Input voltage range: 85 - 264 V AC, (120 - 375 V DC), Nominal input voltage: 100 - 240 V AC, 125 - 250 V DC, Rated output voltage: 24 V DC (± 2%), Rated output current: 20 A, Setting range for the output voltage: 24 - 28 V DC, Rated output power: 480 W, Degree of Protection: IP20, Heat dissipation: 59 W
Automation > DC-power supply
Transformers
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
More info
▲General specifications
Product Name
Eaton PSG power supply unit
Catalog Number
172894
Model Code
PSG480E24RM
EAN
4015081694822
Product Length/Depth
180 mm
Product Height
170 mm
Product Width
165 mm
Product Weight
1.49 kg
Certifications
EN 55011
ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024
Electrical Safety (of IT equipment) : SIQ to EN60950-1, UL/c-UL recognized to UL 60950-1, CSA-C22.2 No. 60950-1, CB scheme to IEC 60950-1
Mains harmonics limitation: EN 601000-3-2
RoHS
2014/30/EU
2014/35/EU
Electrical equipment of machines: IEC60204-1 (Overvoltage category III)
SELV (EN 60950)
EN 50178/IEC 62103
IEC/EN 61204-3
Class2: UL1310 and CSA-C22.2 No. 223
PELV (EN 60204)
Protection against electric shock: DIN 57100-410
UL 508
IEC Rated
CSA Std. C22.2
EN Listed
EAC
ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024
Electrical Safety (of IT equipment) : SIQ to EN60950-1, UL/c-UL recognized to UL 60950-1, CSA-C22.2 No. 60950-1, CB scheme to IEC 60950-1
Mains harmonics limitation: EN 601000-3-2
RoHS
2014/30/EU
2014/35/EU
Electrical equipment of machines: IEC60204-1 (Overvoltage category III)
SELV (EN 60950)
EN 50178/IEC 62103
IEC/EN 61204-3
Class2: UL1310 and CSA-C22.2 No. 223
PELV (EN 60204)
Protection against electric shock: DIN 57100-410
UL 508
IEC Rated
CSA Std. C22.2
EN Listed
EAC
Features & Functions
Electric connection type
Screw connection
Enclosure material
Aluminum
Features
Modular version
Short-circuit-proof
Output voltage stabilized
Stabilized
Mains overvoltage protection (against internal overvoltage)
Short-circuit-proof
Output voltage stabilized
Stabilized
Mains overvoltage protection (against internal overvoltage)
Fitted with:
Not accessible internal input fuse (T8 AH/250 V) for device protection
Functions
Secondary voltage adjustable
Transient overvoltage protection (varistor)
Transient overvoltage protection (varistor)
Number of phases
1
General
Degree of Protection
IP20
NEMA 1
NEMA 1
Environmental class
3K3 (Climatic class, according to EN 60721)
Mounting Method
Rail mounting possible
Pollution degree
2
Product category
Power supply
Connection type
Screw connection
LED indicator
Status indication of "DC OK": Green LED
Power consumption
600 VA
Rated operational current (Ie)
Max. 5 A at 115 V AC
Max. 3 A at 230 V AC
Max. 3 A at 230 V AC
Ambient conditions, mechanical
Shock resistance
30 g (300 m/s²) in all directions, Mechanical, According to IEC/EN 60068-2-27
Vibration resistance
10 - 500 Hz at 30 m/s² (3 G max ) for 60 min. in X-axis, Y-axis, Z-axis directions, (IEC/EN 60068-2-6)
Climatic environmental conditions
Ambient operating temperature - min
-20 °C
Ambient operating temperature - max
75 °C
Ambient storage temperature - min
-25 °C
Ambient storage temperature - max
85 °C
Climatic proofing
< 95 % relative humidity at +25 °C, no condensation
Terminal capacities
Terminal capacity (flexible with ferrule)
Primary side: 0.82 - 5.3 mm²
Secondary side: 3.3 - 5.3 mm²
Secondary side: 3.3 - 5.3 mm²
Terminal capacity (flexible with ferrule AWG)
Primary side: 18 - 10
Secondary side: 12 - 10
Secondary side: 12 - 10
Stripping length (main cable)
7 mm
Tightening torque
0.5 Nm, Screw terminals, Primary side
0.5 Nm, Screw terminals, Secondary side
0.5 Nm, Screw terminals, Secondary side
Safety
Protection class
1 (with PE connection)
Current limitation
Overcurrent = 150 % of max. output power, at short-circuit, safety and safety features
Insulation resistance
1.5 kV AC (routine test, input)
4 kV AC (type test, input/output)
1.5 kV AC (type test, output)
1.5 kV AC (type test, input)
3 kV AC (routine test, input/output)
500 V AC (routine test, output)
4 kV AC (type test, input/output)
1.5 kV AC (type test, output)
1.5 kV AC (type test, input)
3 kV AC (routine test, input/output)
500 V AC (routine test, output)
Mean time between failures (MTBF)
> 500,000 h
Input characteristics
Input voltage at AC 50 Hz - min
85 V
Input voltage at AC 50 Hz - max
264 V
Input voltage at DC - min
120 V
Input voltage at DC - max
375 V
Inrush current
< 35 A at 230 V AC (Inrush current limitation I²t (+25 °C))
< 35 A at 115 V AC (Inrush current limitation I²t (+25 °C))
< 35 A at 115 V AC (Inrush current limitation I²t (+25 °C))
Leakage current at ground IPE - max
< 1 mA (at 240 V AC)
Mains failure bridging
> 20 ms (at 115 V AC)
> 125 ms (at 230 V AC)
> 125 ms (at 230 V AC)
Ramp/run-up time
< 1000 ms
Short-term interruption
100% voltage dip, 1 cycle (20 ms at 50 Hz), automatic start, Input characteristics
Supply frequency
50/60 Hz, Input, Rated value
63 Hz, Input, max. Range
47 Hz, Input, min. Range
63 Hz, Input, max. Range
47 Hz, Input, min. Range
Supply voltage at AC, 50 Hz - min
85 VAC
Supply voltage at AC, 50 Hz - max
264 VAC
Supply voltage at DC - min
0 VDC
Supply voltage at DC - max
0 VDC
Tripping characteristic
B
Output characteristics
Residual ripple
< 50 mV / < 150 mV
Capacitive load
10000 µF max. Capacitive load starting, Output characteristics
Efficiency
> 90 % (230 V AC)
> 90 % (115 V AC)
> 90 % (115 V AC)
Output
Parallel switching for redundancy, with O ring diode (PSG960R24RM)
Output current at AC, 50 Hz - max
20 A
Output voltage
24 V
Output voltage at DC - min
24 V
Output voltage at DC - max
28 V
Rated output power
480 W
Voltage tolerance
± 2 %, Rated output voltage
Design verification
Equipment heat dissipation, current-dependent Pvid
0 W
Heat dissipation capacity Pdiss
0 W
Heat dissipation per pole, current-dependent Pvid
0 W
Rated operational current for specified heat dissipation (In)
0 A
Static heat dissipation, non-current-dependent Pvs
59 W
10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
| Feature Name | Feature Value |
|---|---|
| Voltage type (supply voltage) (EF002991) | AC |
| 1st secondary output voltage (EF006792) | 24 V |
| 2nd secondary output voltage (EF006797) | 0 V |
| 3rd secondary output voltage (EF006800) | 0 V |
| Max. output current 1 (EF008284) | 20 A |
| Max. output current 2 (EF008285) | 0 A |
| Max. output current 3 (EF008286) | 0 A |
| Secondary voltage adjustable (EF007002) | Yes |
| Nominal value output voltage 1 (EF009393) | 24 V |
| Nominal value output voltage 2 (EF009394) | 0 V |
| Nominal value output voltage 3 (EF009395) | 0 V |
| Nominal value output current 1 (EF009396) | 20 A |
| Nominal value output current 2 (EF009397) | 0 A |
| Nominal value output current 3 (EF009398) | 0 A |
| Short-circuit-proof (EF007332) | Yes |
| Rated supply voltage AC 50 Hz (EF007076) | 85 V |
| Rated supply voltage AC 60 Hz (EF007077) | 85 V |
| Rated supply voltage DC (EF007078) | 0 V |
| Output voltage stabilized (EF003092) | Yes |
| Power consumption (EF000346) | 600 VA |
| Power output (EF003034) | 480 W |
| Stabilized (EF005302) | Yes |
| Type of electric connection (EF003961) | Screw connection |
| Suitable for rail mounting (EF003972) | Yes |
| Wall mounting possible (EF003973) | No |
| Modular version (EF001126) | Yes |
| Width in number of modular spacings (EF002950) | 0 |
| Built-in width (EF000846) | 144 mm |
| Built-in height (EF000332) | 121 mm |
| Direct mounting possible (EF005689) | No |
| Width (EF000008) | 165 mm |
| Height (EF000040) | 170 mm |
| Depth (EF000049) | 180 mm |
| Suitable for safety functions (EF001597) | No |
| SIL according to IEC 61508 (EF009889) | None |
| Performance level according to EN ISO 13849-1 (EF007399) | None |
| Degree of protection (IP) (EF005474) | IP20 |
| Degree of protection (NEMA) (EF011959) | 1 |