View larger
Images are for illustrative purposes only. Please refer to data sheet for details
Micropoint2 Open Area MP2O3H EATON ELECTRIC Partition, fixed, circuit breaker devices area/busbar back area,..
Micropoint2 Open Area
MP2O3H
EATON - MOELLER
1 Pcs.
Partition, fixed, circuit breaker devices area/busbar back area, HxW=600x425mm
Eaton Micropoint 2, Safety lighting, Open area, Stand alone, LED, Maintained / Non-Maintained operation, IP44, 153lm, 3 hour duration, Recessed
Automation > Emergency luminaire
Self contained
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Eaton Moeller Micropoint2 Open Area emergency luminaire is engineered to provide wide, even light distribution across open spaces during main power failures. These units are commonly installed in large halls and open commercial zones to prevent panic and illuminate escape routes. Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Mounting method (EF000003): Built-in
- With pictogram (EF011099): No
- With remote switch connection (EF007947): Yes
- Power supply system (EF000233): Peripheral (individual battery)
- Battery technology (EF004351): NiCd
- Lamp type (EF002423): LED non-replaceable
- With light source (EF005905): Yes
- Suitable for number of light sources (EF006436): 1
- Number of lighting heads (EF004258): 1
- Housing material (EF001596): Plastic
- Housing colour (EF000136): White
- Voltage type (EF000187): AC
- Nominal voltage (EF005127): 220 V
- Type of control gear (EF000381): LED driver constant current
- Light distributor (EF012170): Focal lens
- Degree of protection (IP) (EF005474): IP44
More info
▲Insulated enclosure open above+below, HxWxD=500x375x300mm
Distribution board basic enclosure, material characteristic polycarbonate, impact-resistant, degree of protection IP65, patented cover fasteners with integrated overpressure compensation, enclosure side plates closed, full-area knockout, open tip and bottom, sealable cover fasteners, grey (base), transparent (cover), mounting depth with mounting plate=279mm, cover type: transparent, lower section type: top and bottom open.
Delivery program
Dimensions
Product range
xEnergy Safety Ci
Basic function
Basic enclosures
Product function
Panel enclosures
Single unit/Complete unit
Single unit
Degree of Protection
IP65
Standards
EN 62208
EN 61439-2
EN 61439-2
Description
Housing prepared for distribution board
Two sides closed, can be folded out; two sides open
Sealable cover fasteners
Integrated pressure-relief mechanism for short-circuits
Two sides closed, can be folded out; two sides open
Sealable cover fasteners
Integrated pressure-relief mechanism for short-circuits
Type cover
Transparent
Width
375 mm
Height
500 mm
Depth
300 mm
Mounting depth with mounting plate
280 mm
Mounting depth for mounting rail 7.5 mm height
272 mm
Mounting depth for mounting rail 15 mm height
265 mm
Enclosure depth
Legend for the graphic
Dimensions from top:
Mounting depth with mounting plate
Mounting depth for mounting rail 7.5 mm height
Mounting depth for mounting rail 15 mm height
Enclosure depth
Mounting depth with mounting plate
Mounting depth for mounting rail 7.5 mm height
Mounting depth for mounting rail 15 mm height
Enclosure depth
Technical data
General
Standards
EN 62208
EN 61439-2
EN 61439-2
Ambient temperature
-40 - +80 °C
Degree of Protection
IP65
Material characteristics
Material
glass-fibre reinforced polycarbonate (base)
non-reinforced polycarbonate (cover)
Halogen free
non-reinforced polycarbonate (cover)
Halogen free
Surface treatment
Resistant to corrosion
Material properties
ElectricalTrack resistance
KB160, KC175 (base, to IEC 60112)
KB100, KC200 (cover, to IEC 60112)
KB100, KC200 (cover, to IEC 60112)
ElectricalSurface resistance to IEC 60093
1 Ω x 1013
ThermalTemperature resistant
-40 °C - 120 °C (enclosure)
85 °C (enclosure bolt)
80 °C (gasket)
85 °C (enclosure bolt)
80 °C (gasket)
Chemical resistanceChemical resistant
Resistant against: Acids < 10 %, mineral oil, alcohol, gasoline, greases, salt solutions
Partly resistant to: Acids > 10 %
Not resistant to: alkalis, benzene
Partly resistant to: Acids > 10 %
Not resistant to: alkalis, benzene
AtmosphericSaline spray
IEC 60068-2-11
AtmosphericUV resistance
Beneath protective shield
Flammability characteristicsFlammability classification according to UL94
V1 (base)
V2 (cover)
V2 (cover)
Design verification as per IEC/EN 61439
Technical data for design verification
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Individual enclosure for wall mounting [PV]
41 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Starting enclosure for wall mounting [PV]
38 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890Middle enclosure for wall mounting [PV]
35 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Individual enclosure for wall mounting [PV]
82 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Starting enclosure for wall mounting [PV]
77 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890Middle enclosure for wall mounting [PV]
69 W
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Lower part: 960 °C / cover: 850 °C; meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Not relevant to indoor installations.
10.2 Strength of materials and parts10.2.5 Lifting
30 kg per enclosure with support frame and lifting aid met; assembled and secured as per the latest applicable instruction leaflet.
10.2 Strength of materials and parts10.2.6 Mechanical impact
IK10
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
IP65
10.4 Clearances and creepage distances
Is the panel builder's responsibility.
10.5 Protection against electric shock
Protection class 2, therefore not applicable.
10.6 Incorporation of switching devices and components
Is the panel builder's responsibility.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Ui= 1000 V AC
10.9 Insulation properties10.9.3 Impulse withstand voltage
8 kV
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Meets the product standard's requirements.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
Meets the product standard's requirements.
Technical data ETIM 7.0
Distribution boards (EG000023) / Empty cabinet (EC000058)
Electric engineering, automation, process control engineering / Electrical installation, device / Electrical distribution system (incl. small distribution board) / Empty cabinet (small distribution board) ([email protected] [ACN385011])
Mounting method
Surface mounted (plaster)
Type of cover
Cover
Cover model
Closed
Type of door
None
Transparent cover/door
Yes
With lock
No
Nominal current (In)
1600 A
Height
500 mm
Width
375 mm
Depth
300 mm
Built-in depth
279 mm
Internal depth
279 mm
Plate thickness cabinet
6 mm
Plate thickness door/cover
6 mm
Colour
Grey
RAL-number
7035
Number of modules
1
Number of rows
0
Width in number of modular spacings
17
Number of openings for flange plates
6
Extension possible
Yes
Number of conduit inlets
104
Material housing
Plastic
Surface protection
Other
With mounting plate
No
Suitable for outdoor use
Yes
Suitable for lightning protection
Yes
Degree of protection (IP)
IP65
Degree of protection (NEMA)
Other
Protection class
II
Impact strength
IK10
Circuit integrity
None