View larger
Images are for illustrative purposes only. Please refer to data sheet for details
BP-F-830/20/3-F-IVS 111400 EATON ELECTRIC Floor standing distribution board
BP-F-830/20/3-F-IVS
111400
EATON - MOELLER
1 Pcs.
Floor standing distribution board
Service distribution boards IVS are used for power distribution and measurement purposes in electrical systems for household electrical systems and in comparative systems such as residential buildings, schools, administration centers, offices and similar buildings.
Automation > Enclosure/switchgear cabinet (empty)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
Built for large-scale power distribution, the BP-F-830/20/3-F-IVS 111400 EATON ELECTRIC Floor standing distribution board from Eaton Moeller serves as a central hub for organizing, routing, and protecting primary electrical circuits in industrial buildings. Such distribution boards safely enclose high-capacity switching devices, protective relays, and busbar systems.
Pricing, availability, and lead time are confirmed per enquiry through an RFQ.
- Rated operational voltage: U e
- Rated frequency: f
- Rated operational current: I e
- Individual enclosure, free-standing: P V
- Starting enclosure, free-standing: P V
- Middle enclosure, free-standing: P V
- Individual enclosure for wall mounting: P V
- Starting enclosure for wall mounting: P V
- Middle enclosure for wall mounting: P V
- Individual enclosure, free-standing: P V
- Starting enclosure, free-standing: P V
- Middle enclosure, free-standing: P V
- Individual enclosure for wall mounting: P V
- Starting enclosure for wall mounting: P V
- Middle enclosure for wall mounting: P V
- Width (EF000008): 830 mm
More info
▲Delivery programme
Product range | Service distribution board IVS | ||
Basic function | Floor-standing enclosures | ||
Single unit/Complete unit | Complete housing | ||
Degree of Protection | IP30 (only with door) | ||
Description | Profi Plus basic enclosures without door Exchangeable door hinges | ||
Material | Sheet steel | ||
Surface finish | Polyester powder coating Phosphated RAL 7035, light grey | ||
Colour | RAL 7035, light grey | ||
Information about equipment supplied | Including mounting system for the IVS mounting units including insulating surround and mounted insulated support bracket including cable entry top and bottom, with push-through flange | ||
Width | mm | 830 | |
Height | mm | 2060 | |
Depth | mm | 300 |
Technical data
| General | |||
Standards | EN 60439-1/3 IEC 62208 | ||
Protection class | 1 | ||
Degree of Protection | IP30 (only with door) | ||
Power loss | |||
Max. admissible heat dissipation, ambient air temperature +35 °C | W | 379 | |
Weight | kg | 58.8 | |
| Material characteristics | |||
Material | Sheet steel | ||
Surface treatment | Painting, phosphated and polyester powder coating | ||
Surface finish | Polyester powder coating Phosphated RAL 7035, light grey | ||
Colour | RAL 7035, light grey | ||
Material characteristics | |||
Type Door | Doors with covered hinges Can be removed from 90° | ||
door opening angle | 167° (single mounting) 60° (combination mounting) | ||
Door interlock | Hinge handle with three-point turn-lock Cylinder lock | ||
| Material properties | |||
Mechanical | |||
Impact resistance | IK07 | ||
Cable entry | Various covers allow cable entry from above and/or below | ||
Electrical | |||
Rated operational voltage | Ue | V | 690 |
Rated frequency | f | Hz | 50 |
Rated operational current | Ie | CSA | 630 |
Max. admissible heat dissipation, ambient air temperature +35 °C | W | 379 | |
Earthings | M6 weld stud (base frame) M5 self-tapping screw (enclosure side plate, top/bottom panel) M6 weld stud (door) | ||
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification | |||
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees, calculated as per IEC 60890 | |||
Individual enclosure, free-standing | PV | CO | 213 |
Starting enclosure, free-standing | PV | CO | 206 |
Middle enclosure, free-standing | PV | CO | 200 |
Individual enclosure for wall mounting | PV | CO | 194 |
Starting enclosure for wall mounting | PV | CO | 190 |
Middle enclosure for wall mounting | PV | CO | 186 |
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees, calculated as per IEC 60890 | |||
Individual enclosure, free-standing | PV | CO | 428 |
Starting enclosure, free-standing | PV | CO | 414 |
Middle enclosure, free-standing | PV | CO | 402 |
Individual enclosure for wall mounting | PV | CO | 388 |
Starting enclosure for wall mounting | PV | CO | 380 |
Middle enclosure for wall mounting | PV | CO | 373 |
IEC/EN 61439 design verification | |||
10.2 Strength of materials and parts | |||
10.2.2 Corrosion resistance | Meets the product standard's requirements. | ||
10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. | ||
10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. | ||
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Meets the product standard's requirements. | ||
10.2.4 Resistance to ultra-violet (UV) radiation | Not relevant to indoor installations. | ||
10.2.5 Lifting | Met; assembled and secured as per the latest applicable instruction leaflet. | ||
10.2.6 Mechanical impact | IK07 | ||
10.2.7 Inscriptions | Meets the product standard's requirements. | ||
10.3 Degree of protection of ASSEMBLIES | IP30 | ||
10.4 Clearances and creepage distances | Is the panel builder's responsibility. | ||
10.5 Protection against electric shock | < 0.1 Ω; meets the product standard's requirements. | ||
10.6 Incorporation of switching devices and components | Is the panel builder's responsibility. | ||
10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. | ||
10.8 Connections for external conductors | Is the panel builder's responsibility. | ||
10.9 Insulation properties | |||
10.9.2 Power-frequency electric strength | Ui= 440 V AC | ||
10.9.3 Impulse withstand voltage | 4 kV | ||
10.9.4 Testing of enclosures made of insulating material | Does not apply to metal enclosures. | ||
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. | ||
10.11 Short-circuit rating | Is the panel builder's responsibility. | ||
10.12 Electromagnetic compatibility | Is the panel builder's responsibility. | ||
10.13 Mechanical function | Meets the product standard's requirements. |