View larger
Images are for illustrative purposes only. Please refer to data sheet for details
XVTL-MP/BF-8/3/20-IVS 118944 EATON ELECTRIC Distribution cabinet, IVS, HxWxD 2000x800x300mm, IP55
XVTL-MP/BF-8/3/20-IVS
118944
EATON - MOELLER
1 Pcs.
Distribution cabinet, IVS, HxWxD=2000x800x300mm, IP55
Fragment basic equipment for XVTL-MP/BF...-IVS (IP55), consisting of frame, rear panel, door (slim door) with XALP (rotary lever) and XALA (conversion kit for half cylinder), top cover (prepared for F3A gland plate insert), mounting system for the IVS mounting units, insulating surround with installed insulated support brackets. For IVS mounting units, refer to the IVS service system catalog. Sheet steel, with powder coating RAL 7035
Automation > Enclosure/switchgear cabinet (empty)
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
The Eaton Moeller distribution cabinet, part number XVTL-MP/BF-8/3/20-IVS (118944), serves as a robust electrical enclosure designed for centralized power distribution and sub-circuit management. IVS system cabinets provide organized, safe housing for modular switching and metering assemblies.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Rated operational voltage: U e
- Rated frequency: f
- Rated operational current: I e
- Individual enclosure, free-standing: P V
- Starting enclosure, free-standing: P V
- Middle enclosure, free-standing: P V
- Individual enclosure for wall mounting: P V
- Starting enclosure for wall mounting: P V
- Middle enclosure for wall mounting: P V
- Individual enclosure, free-standing: P V
- Starting enclosure, free-standing: P V
- Middle enclosure, free-standing: P V
- Individual enclosure for wall mounting: P V
- Starting enclosure for wall mounting: P V
- Middle enclosure for wall mounting: P V
- Width (EF000008): 308.5 mm
More info
▲Delivery programme
Product range | Service distribution board IVS | ||
Basic function | Combination enclosures | ||
Single unit/Complete unit | Complete housing | ||
Degree of Protection | IP55 (with door and flange) | ||
Description | Basic enclosure xVtl Including open cable entries top, prepared for F3A flange | ||
Material | Sheet steel | ||
Surface finish | Polyester powder coating Phosphated RAL 7035, light grey | ||
Colour | RAL 7035, light grey | ||
Information about equipment supplied | including frame, doors, back plate, top plate and branding strip Including support frame for the IVS mounting units including insulating surround and mounted insulated support bracket Without side walls | ||
Width | mm | 800 | |
Height | mm | 2000 | |
Depth | mm | 300 |
Technical data
| General | |||
Standards | EN 60439-1/3 IEC 62208 | ||
Protection class | 1 | ||
Degree of Protection | IP55 (with door and flange) | ||
Power loss | |||
Max. admissible heat dissipation, ambient air temperature +35 °C | W | 429 | |
Weight | kg | 111 | |
| Material characteristics | |||
Material | Sheet steel | ||
Surface treatment | Painting, phosphated and polyester powder coating | ||
Surface finish | Polyester powder coating Phosphated RAL 7035, light grey | ||
Colour | RAL 7035, light grey | ||
Material characteristics | |||
Type Door | Doors with covered hinges Can be removed from 90° | ||
door opening angle | 120° (single mounting) 120° (combination mounting) | ||
Door interlock | Roller lever lock Three-point interlock | ||
| Material properties | |||
Mechanical | |||
Impact resistance | IK07 | ||
Cable entry | Various covers allow cable entry from above and/or below | ||
Electrical | |||
Rated operational voltage | Ue | V | 690 |
Rated frequency | f | Hz | 50 |
Rated operational current | Ie | CSA | 630 |
Max. admissible heat dissipation, ambient air temperature +35 °C | W | 429 | |
Earthings | Screw M10 (base frame) M6 weld stud (enclosure side plate, top, bottom panel) Taptite screw M6 (door) | ||
Design verification as per IEC/EN 61439(Show features)(Hide features)
Technical data for design verification | |||
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees, calculated as per IEC 60890 | |||
Individual enclosure, free-standing | PV | CO | 208 |
Starting enclosure, free-standing | PV | CO | 201 |
Middle enclosure, free-standing | PV | CO | 195 |
Individual enclosure for wall mounting | PV | CO | 191 |
Starting enclosure for wall mounting | PV | CO | 193 |
Middle enclosure for wall mounting | PV | CO | 174 |
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees, calculated as per IEC 60890 | |||
Individual enclosure, free-standing | PV | CO | 417 |
Starting enclosure, free-standing | PV | CO | 404 |
Middle enclosure, free-standing | PV | CO | 392 |
Individual enclosure for wall mounting | PV | CO | 382 |
Starting enclosure for wall mounting | PV | CO | 387 |
Middle enclosure for wall mounting | PV | CO | 348 |
IEC/EN 61439 design verification | |||
10.2 Strength of materials and parts | |||
10.2.2 Corrosion resistance | Meets the product standard's requirements. | ||
10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. | ||
10.2.3.2 Verification of resistance of insulating materials to normal heat | Not applicable. | ||
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Not applicable. | ||
10.2.4 Resistance to ultra-violet (UV) radiation | Not relevant to indoor installations. | ||
10.2.5 Lifting | Met; assembled and secured as per the latest applicable instruction leaflet. | ||
10.2.6 Mechanical impact | IK10 | ||
10.2.7 Inscriptions | Meets the product standard's requirements. | ||
10.3 Degree of protection of ASSEMBLIES | IP55 | ||
10.4 Clearances and creepage distances | Is the panel builder's responsibility. | ||
10.5 Protection against electric shock | < 0.1 Ω; meets the product standard's requirements. | ||
10.6 Incorporation of switching devices and components | Is the panel builder's responsibility. | ||
10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. | ||
10.8 Connections for external conductors | Is the panel builder's responsibility. | ||
10.9 Insulation properties | |||
10.9.2 Power-frequency electric strength | Ui= 690 V AC | ||
10.9.3 Impulse withstand voltage | 6 kV | ||
10.9.4 Testing of enclosures made of insulating material | Does not apply to metal enclosures. | ||
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. | ||
10.11 Short-circuit rating | Is the panel builder's responsibility. | ||
10.12 Electromagnetic compatibility | Is the panel builder's responsibility. | ||
10.13 Mechanical function | Meets the product standard's requirements. |