View larger
Images are for illustrative purposes only. Please refer to data sheet for details
XN-1AO-I(0/4...20MA) 140065 Y7-140065 EATON ELECTRIC Analog output module XI/ON, 24 V DC, 1AO (0/4 to 20mA)
XN-1AO-I(0/4...20MA)
140065
Y7-140065
EATON - MOELLER
1 Pcs.
Analog output module XI/ON, 24 V DC, 1AO (0/4 to 20mA)
XN-1AO-I(0/4...20MA)
The XI/ON standard I/O system offers the right I/O solution for every application due to its great modularity and large variety of functions. Pluggable modules, hot-swapping of modules, wiring on the basic module screw or tension spring, modules' mechanical coding. The standard gateways support the CANopen bus systems, PROFIBUS-DP deviceNet and Ethernet.
Automation > Fieldbus, decentr. periphery - analogue I/O module
Remote I / O Modules XION
Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.
Request a Quote
Pricing and availability are confirmed for each enquiry. Send this part and we will reply with price and lead time.
Request QuoteProduct Overview
An Eaton Moeller analog output module XI/ON, part number XN-1AO-I(0/4...20MA), is utilized in automation systems to convert digital controller values into continuous analog signals for actuators, drives, and control valves. These modules bridge the gap between processing units and physical process equipment requiring precise current adjustments.
Pricing, availability and lead time are confirmed per enquiry through an RFQ.
- Supply voltage AC 50 Hz (EF007532): 0 V
- Supply voltage AC 60 Hz (EF007533): 0 V
- Supply voltage DC (EF007534): 20.4 V
- Voltage type (supply voltage) (EF002991): DC
- Input, current (EF003204): No
- Input, voltage (EF003205): No
- Input, resistor (EF003206): No
- Input, resistance thermometer (EF003207): No
- Input, thermocouple (EF003208): No
- Input signal, configurable (EF003209): No
- Resolution of the analogue inputs (EF003575): 0 Bit
- Output, current (EF003212): Yes
- Output, voltage (EF003213): No
- Output signal configurable (EF003214): No
- Resolution of the analogue outputs (EF003577): 16 Bit
- Number of analogue inputs (EF001994): 0
More info
▲EL-Nummer (Norway)
4520622
Analog output module XI/ON, 24 V DC, 1AO (0/4 to 20mA)
The XI/ON standard I/O system offers the right I/O solution for every application due to its great modularity and large variety of functions. Pluggable modules, hot-swapping of modules, wiring on the basic module screw or tension spring, modules' mechanical coding. The standard gateways support the CANopen bus systems, PROFIBUS-DP deviceNet and Ethernet.
Delivery program
Function
XI/ON I/O modules
Function
XN Slice module
Short Description
1 Analog outputs
0/4 to 20 mA
0/4 to 20 mA
For use with
XN-S3T-SBB
XN-S3S-SBB
XN-S3S-SBB
Technical data
General
Standards
EN 61000-6-2
EN 61000-6-4
EN 61131-2
EN 61000-6-4
EN 61131-2
Potential isolation
Yes, through optocoupler
Ambient temperatureAmbient temperature, operation
0 - +55 °C
Ambient temperatureStorage, transport [ϑ]
-25 - +85 °C
Relative humidityRelative humidity
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Ambient conditions, mechanicalDegree of Protection
IP20
Ambient conditions, mechanicalHarmful gases
SO2: 10 (rel. humidity < 75%, no condensation)
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Vibration resistance, operating conditions
according to IEC/EN 60068-2-6
Mechanical shock resistance
according to IEC 60068-2-27 g
Continuous shock resistance (IEC/EN 60068-2-29)
According to IEC 60068-2-29
Drop and topple
According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC)ESD [Air/contact discharge]
EN 61000-4-2 kV
Electromagnetic compatibility (EMC)Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]
EN 61100-4-2 V/m
Electromagnetic compatibility (EMC)Burst
EN 61100-4-4
Electromagnetic compatibility (EMC)Surge
EN 61100-4-5
Electromagnetic compatibility (EMC)Radiated RFI
EN 61100-4-6 V
Electromagnetic compatibility (EMC)Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]
EN 55016-2-3 dB
Electromagnetic compatibility (EMC)Voltage fluctuations/voltage dips
EN 61131-2
Electromagnetic compatibility (EMC)Type test
to EN 61131-2
Approvals
CE, cULus
Other technical data (sheet catalogue)
Analog input modules
Measured variables
Current
Channels
1 Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 39 mA
Heat dissipation
normally 1 W
Offset error
0.1 %
Linearity
0.02 %
Basic error limit at 23 °C
0.2 %
Repetition accuracy (deviation)
0.05 %
Temperature coefficient
300 ppm/°C of full scale
Measured value representation
16-bit signed integer
12-bit full range left-justified
12-bit full range left-justified
Analog output modules
Measured variables
Current
Channels
1 Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 39 mA
Heat dissipation
normally 1 W
Output current
0/4 - 20 mA
Load resistanceResistive load
< 450 Ω
Load resistanceInductive load
< 0.001 h
Transfer frequency
200 Hz
Offset error
0.1 %
Linearity
0.02 %
Basic error limit at 23 °C
0.2 %
Repetition accuracy (deviation)
0.05 %
Output ripple
0.02 %
Temperature coefficient
300 ppm/°C of full scale
Settling timeResistive load
0.1 ms
Settling timeInductive load
0.5 ms
Settling timeCapacitive load
0.5 ms
Measured value representation
16-bit signed integer
12-bit full range left-justified
12-bit full range left-justified
Digital outputs
Channels
1 Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from the supply terminal (at load current = 0 mA) [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 39 mA
Power loss [P]
Normally 1 W
Resistive load
< 450 Ω
Inductive load
< 0.001 h
Digital inputs
Channels
1 Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 39 mA
Heat dissipation
normally 1 W
Relay modules
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 39 mA
Power loss [P]
Normally 1 W
Power supply module
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 39 mA
Power loss [P]
1 W
Counter module
Channels
1 Number
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 39 mA
Heat dissipation
normally 1 W
Measuring modes
Temperature coefficient
300 ppm/°C of full scale
Number of parameter bits
3
Interfaces
Rated voltage through supply terminal [UL]
24 V DC
Rated current consumption from supply terminal [IL]
50 mA
Rated current consumption from module bus [IMB]
≦ 39 mA
Power loss [P]
Normally 1 W
Number of parameter bytes
3
Design verification as per IEC/EN 61439
Technical data for design verification
Rated operational current for specified heat dissipation [In]
0 A
Heat dissipation per pole, current-dependent [Pvid]
0 W
Equipment heat dissipation, current-dependent [Pvid]
0 W
Static heat dissipation, non-current-dependent [Pvs]
1 W
Heat dissipation capacity [Pdiss]
0 W
Operating ambient temperature min.
0 °C
Operating ambient temperature max.
+55 °C
Degree of Protection
IP20
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 7.0
PLC's (EG000024) / Fieldbus, decentr. periphery - analogue I/O module (EC001596)
Electric engineering, automation, process control engineering / Control / Field bus, decentralized peripheral / Field bus, decentralized peripheral - analogue I/O module ([email protected] [BAA061014])
Supply voltage AC 50 Hz
0 - 0 V
Supply voltage AC 60 Hz
0 - 0 V
Supply voltage DC
20.4 - 28.8 V
Voltage type of supply voltage
DC
Input, current
No
Input, voltage
No
Input, resistor
No
Input, resistance thermometer
No
Input, thermocouple
No
Input signal, configurable
No
Resolution of the analogue inputs
0 Bit
Output, current
Yes
Output, voltage
No
Output signal configurable
No
Resolution of the analogue outputs
16 Bit
Number of analogue inputs
2
Number of analogue outputs
0
Analogue inputs configurable
Yes
Analogue outputs configurable
Yes
Number of HW-interfaces industrial Ethernet
0
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces parallel
0
Number of HW-interfaces Wireless
0
Number of HW-interfaces USB
0
Number of HW-interfaces other
1
Supporting protocol for TCP/IP
No
Supporting protocol for PROFIBUS
No
Supporting protocol for CAN
No
Supporting protocol for INTERBUS
No
Supporting protocol for ASI
No
Supporting protocol for KNX
No
Supporting protocol for MODBUS
No
Supporting protocol for Data-Highway
No
Supporting protocol for DeviceNet
No
Supporting protocol for SUCONET
No
Supporting protocol for LON
No
Supporting protocol for PROFINET IO
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for SERCOS
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for SafetyBUS p
No
Supporting protocol for other bus systems
No
Radio standard Bluetooth
No
Radio standard WLAN 802.11
No
Radio standard GPRS
No
Radio standard GSM
No
Radio standard UMTS
No
IO link master
No
System accessory
Yes
Degree of protection (IP)
IP20
Degree of protection (NEMA)
Type of electric connection
Screw-/spring clamp connection
Fieldbus connection over separate bus coupler possible
Yes
Rail mounting possible
Yes
Wall mounting/direct mounting
No
Front build in possible
No
Rack-assembly possible
No
Suitable for safety functions
No
Category according to EN 954-1
SIL according to IEC 61508
None
Performance level acc. EN ISO 13849-1
None
Appendant operation agent (Ex ia)
No
Appendant operation agent (Ex ib)
No
Explosion safety category for gas
None
Explosion safety category for dust
None
Width
12.6 mm
Height
74 mm
Depth
55.4 mm
Approvals
Product Standards
UL 508; CSA-C22.2 No. 142; IEC/EN 6113-2; CE marking
UL File No.
E205091
UL Category Control No.
NRAQ, NRAQ7
CSA File No.
UL report applies to both US and Canada
CSA Class No.
2252-01, 2252-81
North America Certification
UL recognized, certified by UL for use in Canada
Specially designed for North America
No
Current Limiting Circuit-Breaker
No
Degree of Protection
IEC: IP20, UL/CSA Type: -
Dimensions
Link to sheet catalogue