> PHOENIX CONTACT > Safety > 2981842
PHOENIX CONTACT PSR-SPP-24UC/URM/3X1/3X2 PSR-SPP- 24UC/URM/3X1/3X2 2981842 PHOENIX CONTACT Coupling relay View larger
Images are for illustrative purposes only. Please refer to data sheet for details

PSR-SPP- 24UC/URM/3X1/3X2 2981842 PHOENIX CONTACT Coupling relay

PSR-SPP-24UC/URM/3X1/3X2

2981842

PHOENIX CONTACT

1 Pcs.

Coupling relay Safe coupling relay with forced-conduction contacts, 3 NO contacts, 3 NC contacts, width: 22.5 mm, plug-in push-in terminal block Safe coupling relay with force-guided contacts, 3 N/O contacts, 3 N/C contacts, width: 22.5 mm, pluggable Push-in terminal block

Automation > Device for monitoring of safety-related circuits
Safety

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Notes
Note on application
Note on applicationOnly for industrial use
Product properties
Product typeCoupling relay
Product familyPSRclassic
ApplicationSafe switch off
High demand
Low demand
Mechanical service life10x 106cycles
Relay typeElectromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Data management status
Article revision06
Times
Restart time< 1 s (Boot time)
Electrical properties
Maximum power dissipation for nominal condition6.11 W (at UB= 26.4 V DC, US= 24 V, IS= 45 mA, n = 1, IL² = 48 A², Rcontact= 0.1 )
Nominal operating mode100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage250 V
250 V
Rated surge voltage/insulation4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
Supply
Rated control circuit supply voltage US20.4 V AC/DC ... 26.4 V AC/DC
Input data
General
Rated control circuit supply voltage US24 V AC/DC -15 % / +10 %
Power consumption at UStyp. 1.08 W
Rated control supply current IStyp. 45 mA
Input voltage range20.4 V AC/DC ... 26.4 V AC/DC
Inrush currenttyp. 350 mA DC (Δt s)
typ. 350 mA AC (Δt = 2 ms at Us)
Typ. starting time with Ustyp. 15 ms (when controlled via A1)
Typical release timetyp. 15 ms (when controlled via A1)
Recovery time< 500 ms
Maximum switching frequency0.5 Hz
Protective circuitSurge protection; Suppressor diode
Operating voltage display1 x green LED
Output data
Contact switching type3 enabling current paths
3 confirmation current paths
Contact materialAgSnO2
Maximum switching voltage230 V AC/DC (Observe the load curve)
Minimum switching voltage5 V AC/DC
Limiting continuous current6 A (N/O contact)
6 A (N/C contact)
Maximum inrush current8 A
Inrush current, minimum10 mA
Sq. Total current48 A2
Interrupting rating (ohmic load) max.For additional values, see load curve
Maximum interrupting rating (inductive load)48 W (N/O contact, 24 V DC, τ = 40 ms)
40 W (N/O contact, 48 V DC, τ = 40 ms)
36 W (N/O contact, 60 V DC, τ = 40 ms)
35 W (N/O contact, 110 V DC, τ = 40 ms)
33 W (N/O contact, 220 V DC, τ = 40 ms)
Switching capacitymin. 50 mW
Switching capacity in accordance with IEC 60947-5-15 A (24 V (DC13))
5 A (230 V (AC 15))
Output fuse10 A gL/gG (N/O contact)
4 A gL/gG (N/O contact, for low-demand applications)
6 A gL/gG (N/C contact)
Connection data
Connection technology
pluggableyes
Conductor connection
Connection methodPush-in connection
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG24 ... 16
Stripping length8 mm
Tightening torque0.6 Nm
Dimensions
Width22.5 mm
Height114.5 mm
Depth112 mm
Material specifications
Color (Housing)yellow (RAL 1018)
Housing materialPolyamide
Characteristics
Safety data
Stop category0
Safety data: EN ISO 13849
Category1
Performance level (PL)c
Safety data: IEC 61508 - High demand
Safety Integrity Level (SIL)1
Safety data: IEC 61508 - Low demand
Safety Integrity Level (SIL)1
Safety data
Safety Integrity Level (SIL)1
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Min. degree of protection of inst. locationIP54
Ambient temperature (operation)-20 °C ... 55 °C
Ambient temperature (storage/transport)-40 °C ... 70 °C
Maximum altitudemax. 2000 m (Above sea level)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Shock15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
Vibration (operation)10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)
Approvals
CE
CertificateCE-compliant
Standards and regulations
Air clearances and creepage distances between the power circuits
Standards/regulationsDIN EN 50178
Mounting
Mounting typeDIN rail mounting
Mounting positionvertical or horizontal

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.