> PHOENIX CONTACT > INTERFACE Components (IF) > 2982090
PHOENIX CONTACT ELR W1/ 6-24DC ELR W1/ 6-24DC 2982090 PHOENIX CONTACT Reversing load relay View larger
Images are for illustrative purposes only. Please refer to data sheet for details

ELR W1/ 6-24DC 2982090 PHOENIX CONTACT Reversing load relay

ELR W1/ 6-24DC

2982090

PHOENIX CONTACT

1 Pcs.

Reversing load relay Electronic reversing load relay for DC motor activation, with light indication and protection circuit, output: 10-30 V DC/6 A with a switching time of 80 ms Electronic reversing load relay, for controlling DC motors, with LED display and protective circuit, output: 10 - 30 V DC/6 A with a switch-over time of 80 ms

Automation > Solid state relay
INTERFACE Components (IF)

Product condition, packaging, certifications and applicable manufacturer warranty terms are confirmed with the quotation.

Request a Quote

Pricing and availability are confirmed for each enquiry. Add your required quantity to begin.

No account, online checkout or payment is required.

More info

▲
Technical data
Product properties
Product typeSolid-state contactor
Product familyCONTACTRON
Operating mode100% operating factor
Data management status
Article revision08
Insulation characteristics: Air clearances and creepage distances between the power circuits
InsulationBasic insulation
Overvoltage categoryIII
Pollution degree2
Electrical properties
Number of phases1
Test voltage (Input/output)2.5 kVrms(50 Hz, 60 s)
Supply
Input nameDevice supply
Rated control circuit supply voltage US24 V DC
Control supply voltage range10 V DC ... 30 V DC
Rated control supply current IS7 mA
Protective circuitSurge protection
Input data
Control
Input nameControl input right/left
Current consumption3 mA
Rated actuating voltage UC24 V DC
Triggering voltage range19.2 V DC ... 28.8 V DC
Rated actuating current IC3 mA
Typical response time200 µs
Protective circuitReverse polarity protection
Surge protection
Surge voltage protection> 33 V DC
Switchover time RL/LL(turn-on time)80 ms
Output data
DC output
Rated operating voltage Ue24 V DC
Operating voltage range10 V DC ... 30 V DC
Rated operating current (Load output)6 A
Load current6 A (see to derating)
Quiescent currentapprox. 7 mA (When switched off)
Protective circuitReverse polarity protection
Surge protection
Surge voltage protection> 33 V DC
Current limitation at short-circuits20 A
Connection data
Control circuits
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14
Tightening torque0.5 Nm ... 0.6 Nm
5 lbf-in. ... 7 lbf-in.
Load circuit
Connection methodScrew connection
Stripping length8 mm
Screw threadM3
Conductor cross section rigid0.14 mm² ... 2.5 mm²
Conductor cross section flexible0.14 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 14
Tightening torque0.5 Nm ... 0.6 Nm
5 lbf-in. ... 7 lbf-in.
Signaling
Status displayLED (yellow)
Operating voltage displayGreen LED
Dimensions
Width12.5 mm
Height99 mm
Depth114.5 mm
Material specifications
Colorgray (RAL 7042)
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-20 °C ... 80 °C
Approvals
UKCA
CertificateUKCA-compliant
UL approval
CertificateNLDX.E228652
Standards and regulations
Air clearances and creepage distances between the power circuits
Standards/regulationsEN 50178
Mounting
Mounting typeDIN rail mounting
Assembly notealignable, for spacing see derating
Mounting positionvertical (horizontal DIN rail, motor output below)

Product Datasheet

Electrica Online Product Datasheet Prepared from the current product description, catalog data and structured technical attributes.